Title |
Publisher |
Price |
Dungeon Caverns print with a strong thin base so only uses about 15g of plastic per piece.
The zip file contains a 34 different dungeon cavern tile pieces.
They can be used to make a wide variety of maps for any dungeon
Print perfectly with no supports, no clean up and no mess.
Save printer time and filament and be quickly on your way to creating massive dungeons.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$9.95
|
Sick Bay Map Objects Set
This is the first set of sci-fi map objects I designed using 3D software to create very realistic map objects for your virtual tabletop games and printed maps. Because 3D software was used to create these files, OBJ 3D files are also included ready to print via 3D and SLA printers for physical miniatures for your table.
This set includes:
Cold Sleep Pod
Dental... [click here for more] |
Gamer Printshop |
$2.49
|
Gnarly Tree Pack
4 Gnarly trees hand sculpted in Z Brush
These will print without supports, so turn supports off on your printer
Like all our models, these trees are scaleable, so you can print different sizes to make a whole forest.
All out models are original concepts. They are tested and optimised to print on home 3D printers.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$8.95
|
SHIP DESIGNS: RELIANT WH-M3 (PDF System Generic Game Details and STL 3D Print Files)
Zalo leaned over the rail as he watched a parade of small trader ships descend upon the docking station’s numerous landing pads. Within a few seconds he spotted another boxy looking craft lower its landing gear. The fifth one of that model that Zalo had seen today, this time sporting a pale... [click here for more] |
Fishwife Games |
$4.00
|
This is a complete set of 28 dungeon tiles set to 50mm base size - these will print much quicker than any other dungeon tile.
FAST PRINT - These use minimum plastic and print with a thin base
NO CLEAN UP - Designed for printing without raft and without supports
Compatable with our new APCOAPLYSE RUINS KICKSTARTER
The doors are designed as fixed... [click here for more] |
www.printablescenery.com |
$9.95
|
Viking Longship
The 28mm scale Viking longship can be printed as a complete model or it can be printed in 3 separate sections. It’s designed to fit 28mm models inside.
You will need to print it with (supports touching build plate) switched on because of the angle of the ‘Garboard Strake’ is very steep.
Also, the anchor must be printed with supports touching... [click here for more] |
www.printablescenery.com |
$9.95
|
The War Tower
A set of modular sections that can construct a medieval fortified tower of any height.
Interiors have been modelled
Comes with a rocky base to stand on its own.
There is a removable door option
Prints without supports
All out models are original concepts. They are tested and optimised to print on home 3D printers.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$9.95
|
This is a modular 3D dungeon tile set for use with either SketchUp Make or SketchUp Pro. This set includes 23 components ready to be used in infinite layouts.
A percentage of all proceeds from this title goes to the Phoenix Children's Hospital Foundation!
... [click here for more] |
Middle Kingdoms Adventure & Trading Co. |
$10.00
|
The Shady Orc is the first supplement we launched for use in Fantasy RPG systems. It is a supplement to help game masters, who want to “color” their adventures and bring a little more action. For its use it is necessary to have the books of your preferred system and make small adaptations. We are also introducing our world of Artrusia, present in our Landships wargame, to the RPG scenarios.... [click here for more] |
Voxelhouse |
Pay What You Want
|
Gothic Abby
This is Gothic Abby. Suitable for a wide variety of theaters of war.
Also included are ruin components that can be scattered around it.
This is a large 4 part model to be printed in 4 parts and assembled.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$9.95
|
The Chapel
The Chapel is a standalone scenery piece designed for fantasy wargames and RPG.
The file size is set to 28mm but it can be scaled to 15mm.
The Chapel is part of the Winterdale 2 model range
This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before... [click here for more] |
www.printablescenery.com |
$14.95
|
Aztec Ruin
Despite being long forgotten, the remnants of the Aztec civilization can still be found to this day in the jungles of South America.
The Aztec Ruins can be printed as ruined or non-ruined structures. The complete model will fit on a 160mm x 160mm print bed. We have included the quarter sections for smaller printers. When you print the columns... [click here for more] |
www.printablescenery.com |
$9.95
|
Small Fantasy Cottage
5 Part Fantasy Cottage Optional removable door Interior fully modelled
This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing
Copyright©2017 www.printablescenery.com
See... [click here for more] |
www.printablescenery.com |
$7.95
|
Winterdale Blacksmith
Interior of each tower fully modelled
Optional doors and floor
Prints without supports
All out models are original concepts. They are tested and optimised to print on home 3D printers.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$14.95
|
Barbarian House
The icy, harsh climate of the northern tundra means that any houses built there must be sturdy, durable, and easy to maintain.The Barbarian house is a standalone model. It’s representational of a 12th Century Northern European home. It’s approximately 100mm x 150mm. You will need a 150mm wide print bed to print the complete model.
Using the guide holes... [click here for more] |
www.printablescenery.com |
$9.95
|
Steampunk Outpost
The outpost walls and floor are constructed using a steampunk dungeon tile style system.
The generator and control room both conform to the 50mm x 50mm dungeon tile system, so can fit in or on the square tiles
These are compatible with our fast printing dungeon tiles and the Dock’s dungeon tiles
The Winterdale buildings are designed to be glued and placed together.
This product... [click here for more] |
www.printablescenery.com |
$14.95
|
Winterdale Citadel Towers
Interior of each tower fully modelled
Optional doors and floor
Prints without supports
Two turret options
All out models are original concepts. They are tested and optimised to print on home 3D printers.
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$14.95
|
Winterdale Bridge Cottage
Fantasy Cottage 5.0 5 Part Fantasy Cottage Optional removable door Interior fully modelled
Copyright©2017 www.printablescenery.com
See the video below for more information ... [click here for more] |
www.printablescenery.com |
$9.95
|
The Lighthouse
“After a long voyage a familiar lighthouse on the horizon offers the exhausted crew the first sight of home.”
The Lighthouse is a multipart model designed to be printed without supports. Each section has top locking pins, so that it can be easily stacked and taken apart.
It has interior details, wood grain and digitally hand sculpted brickwork.
This product... [click here for more] |
www.printablescenery.com |
$14.95
|
Winterdale War Cottage
Interior of each tower fully modelled
Optional doors and floor
Prints without supports
All out models are original concepts. They are tested and optimised to print on home 3D printers
Copyright©2017 www.printablescenery.com... [click here for more] |
www.printablescenery.com |
$14.95
|
Welcome to Terrain Frames. A versatile and modular terrain system to take your games further.
Terrain Frames is a 3D printed terrain set that allows you to build and design the look and size of the game you want. This system has been designed from the ground up to not only be about customization, but to be fast and efficient on your printer. This system will allow you to spend less time on the printer... [click here for more] |
Casey Lowe |
FREE
|
Halfling Hole
Halfings tend to hollow out hills, and build their homes within them. The exact reason for this is not clear, but the end result is a cozy home.
The Halfling Homes are designed so you can use them as a stand-alone home or hill. We have designed them as a flat top with cliff sides style of hill, so you can stand your minis on top.
You... [click here for more] |
www.printablescenery.com |
$9.95
|
This special bundle product contains the following titles.
Meeting at a Crossroads Bodyguard STL Regular price: $2.99 Bundle price: $2.00 Format: PDF
The STL file for printing the bodyguard model to go with the Meeting at the Crossroads encounter....
Meeting at a Crossroads Doppelganger STL Regular price: $2.99 Bundle price: $1.99... [click here for more] |
Titus Tabletop Games |
$14.95 $9.99
|
This file represents a Standard Gauge, 1435mm, scaled in 1:100. Naturally this can be scaled to any other size, though at 1:35 you may find yourself in demand for a larger printer. Without modifications this file will work perfectly for FOW and other 15mm games.
For better quality in larger scales, you may want our higher quality file. The ties are spaced 60cm apart, and are shown 5cm high (with the... [click here for more] |
DasTri 3d |
FREE
|
This special bundle product contains the following titles. BSG Miniatures - Leeches Regular price: $5.95 Bundle price: $3.54 Format: STL (3D Model)
Populate your Sewer system, swampy area or any dungeon with these slimy bastards and give your gamers new exciting and slayable enemies. Print "up" as many leeches as you please and resize them to get... [click here for more] |
Black Scrolls Games |
$9.57 $9.50
|
This bundle of STLs includes:
The Pirate Crew
Kato “The Mute Monk”
Pete the Pixie Pirate “Triple P”
Zodiac “The Pirate King”
Fiori Thokk “The Orcish Cleaver”
The Vigilante Crew
Serge “The Messenger” Contreras
Nikola & Antonio Belucci “Wacky Inventors”
Ólafur “The Mad Strategist”
Imani Kaamil “The Scarlet Guardian”
Flagship Zephyr - The Wandering Tavern
Small... [click here for more] |
HOMIEandTheDUDE |
$31.58
|
Welcome to Terrain Frames. A versatile and modular terrain system to take your games further.
Terrain Frames is a 3D printed terrain set that allows you to build and design the look and size of the game you want. This system has been designed from the ground up to not only be about customization, but to be fast and efficient on your printer. This system will allow you to spend less time on the printer... [click here for more] |
Casey Lowe |
$50.00 $35.00
|
Welcome to Terrain Frames. A versatile and modular terrain system to take your games further.
Terrain Frames is a 3D printed terrain set that allows you to build and design the look and size of the game you want. This system has been designed from the ground up to not only be about customization, but to be fast and efficient on your printer. This system will allow you to spend less time on the printer... [click here for more] |
Casey Lowe |
$15.00 $12.00
|
Presenting a revolutionary new approach to 3D printed dungeon tiles.
For a detailed explanation, watch our demonstration below.
This sample pack is offered for free in order to allow you experiment with this new form factor. If you like what you see, you can purchase the entire base dungeon pack!
Contents: - Field Tile - Corner Tile - Single-Wall Tile - Wooden Door - Straight Clip - Corner Clip ... [click here for more] |
Wyloch's Armory |
FREE
|